Flash/File Commands; Bootfile - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE

Flash/File Commands

These commands are used to manage the system code or configuration files.
Table 18 Flash/File Commands
Command

bootfile

copy
delete
dir
show bootfile
bootfile
This command specifies the image used to start up the system.
Syntax
Default Setting
Command Mode
Command Usage
Example
Enterprise AP#bootfile -img.bin
Enterprise AP#
I
NTERFACE
Function
Specifies the file or image used to start up the system
Copies a code image or configuration between flash
memory and a FTP/TFTP server
Deletes a file or code image
Displays a list of files in flash memory
Displays the name of the current operation code file
that
booted the system
bootfile <filename>
filename - Name of the image file.
None
Exec
• The file name should not contain slashes (\ or /), the leading letter of the
file name should not be a period (.), and the maximum length for file
names is 32 characters. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
• If the file contains an error, it cannot be set as the default file.
5-60
Mode Page
GC 5-60
Exec 5-61
Exec 5-62
Exec 5-63
Exec 5-64