3Com 3CRWE876075 User Manual page 112

C 5: C L
HAPTER OMMAND INE
exit
This command returns to the Exec mode or exits the configuration program.
Default Setting
Command Mode
Example
This example shows how to return to the Exec mode from the Interface
Configuration mode, and then quit the CLI session:
Enterprise AP(if-ethernet)#exit
Enterprise AP#exit
CLI session with the Access Point is now closed
Username:
ping
This command sends ICMP echo request packets to another node on the
network.
Syntax
Default Setting
Command Mode
Command Usage
I
NTERFACE
None
Any
ping <host_name | ip_address>
• host_name - Alias of the host.
• ip_address - IP address of the host.
None
Exec
• Use the ping command to see if another site on the network can be
reached.
• The following are some results of the ping command:
- Normal response - The normal response occurs in one to ten seconds,
depending on network traffic.
- Destination does not respond - If the host does not respond, a
"timeout" appears in ten seconds.
5-10