Output Channels - Yamaha 01V96 Version 2 Manual

❏ Output Channels
When you select the Master LAYER button in the Master window, the Bus Out and Aux
Send channels are displayed. The Aux Send channel appears the same as the Bus Out
channels except that the Bus Out channels feature a [STEREO] button.
A
[STEREO] button (Bus Out only)
A
This button is used to route the Bus Out to the Stereo Out.
B
[INSERT] button
B
This button is used to turn on and off the Bus Out's Insert.
C
[COMP] button
This button is used to turn on and off the Bus Out's Compressor.
C
D
Compressor curve
D
This display shows the Compressor's curve.
E
E
[EQ] button
F
This button is used to turn on and off the Bus Out's EQ.
G
H F
EQ curve
I
This display shows the Equalizer's curve, which can be set by dragging.
G
[DELAY] button
This button is used to turn on and off the Bus Out's Delay function.
H
Delay parameter
This parameter is used to set the delay time of the Delay function. Delay times can be
set by dragging.
I
Channel number
This is the channel number. Double-click the channel number to open the Selected
Channel window.
J
K
J
[SELECT] button
L
M
This button is used to select the Bus Out.
K
[SOLO] button
This button solos the Bus Out. It appears orange while the Bus Out is soloed.
L
[ON] button
This button turns the Bus Out on and off. It appears orange while the Bus Out is on.
M
Short channel name
N
This is the channel's short name. To edit the name, click it and type.
N
Channel fader and channel meter
This is the Bus Out fader. The meter to the right of the fader displays the Bus Out sig-
nal level.
O
Fader value indicator
The fader value indicator indicates the fader position in decibels (dB).
O
01V96 Editor—Owner's Manual
12