Output Channels; Comp Button - Yamaha Studio Manager Owner's Manual

Output Channels

When you select the Master LAYER button in the Master window, the Bus Out, Aux
Send, and Matrix Send channels are displayed. The Aux Send and Matrix Send chan-
nels appear the same as the Bus Out channels except that the Bus Out channels fea-
ture a [STEREO] button.
A
A
[STEREO] button (Bus Out only)
This button is used to route the Bus Out to the Stereo Out.
B B [INSERT] button
This button is used to turn on and off the Bus Out's Insert.
C [COMP] button
C
This button is used to turn on and off the Bus Out's Compressor.
D
D Compressor curve
E
This display shows the Compressor's curve.
F
E [EQ] button
G
This button is used to turn on and off the Bus Out's EQ.
H
F EQ curve
I
This display shows the Equalizer's curve, which can be set by dragging.
G [DELAY] button
This button is used to turn on and off the Bus Out's Delay function.
H Delay parameter
This parameter is used to set the delay time of the Delay function. Delay times
can be set by dragging.
I Channel number
This is the channel number. Double-click the channel number to open the
Selected Channel window.
J [AUTO] button
J
K This button displays the Automix status of the Bus Out.
L
K [SELECT] button
M
N
This button is used to select the Bus Out. Clicking this button again in a Matrix
Send channel strip will switch to L or R.
L [SOLO] button
This button solos the Bus Out. It appears orange while the Bus Out is soloed.
M [ON] button
This button turns the Bus Out on and off. It appears orange while the Bus Out is
O
on.
N Short channel name
This is the channel's short name. To edit the name, click it and type.
O Channel fader and channel meter
This is the Bus Out fader. The meter to the right of the fader displays the Bus Out
signal level.
P
P Fader value indicator
The fader value indicator indicates the fader position in decibels (dB).
Studio Manager for V2 DM2000 Editor—Owner's Manual
12