Digital Gain Added To 2Tr In; Balance Control For Input Channels/St In Channels - Yamaha PM1D Supplementary Manual

PM1D Manager for Windows Operating manual

Digital gain added to 2TR IN

Digital gain has been added to the six 2TR IN inputs,
allowing you to adjust the input sensitivity in the digital
domain. The sensitivity of the signal that is input to each
2TR IN can be adjusted independently for L and R.
In conjunction with this, the display in the 2TR IN
screen (MON/CUE function) has changed as follows.

BALANCE control for input channels/ST IN channels

As necessary, you can now control the BALANCE
parameter instead of the PAN parameter for adjacent
odd-numbered/even-numbered input channels or ST IN
channels.
To do this, access the PAN/ROUTING function CH to
MIX screen, and turn on the PAN MODE section BAL-
ANCE button.
BALANCE button
When the BALANCE button is on, the signal flow from
those two channels to the various buses will change as
follows.
6
Hint
Digital gain is valid even if ANALOG is selected as
the source for 2TR IN 1 or 2TR IN 2. In this case, the
setting adjusts the sensitivity after AD conversion.
STEREO bus
The PAN parameter that sends the signal to the STEREO
bus will change to a BALANCE parameter. (A BAL knob
will be displayed instead of a PAN knob in the PAN/
ROUTING function CH to MIX screen.)
INPUT CHANNEL 1
ON
INPUT CHANNEL 2
ON
In this case, the signal of the odd-numbered input chan-
nel will be sent only to the L channel, and the signal of
the even-numbered input channel will be sent only to
the R channel. The BAL knob will adjust the volume of
the two channels in tandem.
BALANCE