Master Track Settings (Output Section) - Yamaha mLAN Mixer Owner's Manual

Master Track Settings (Output Section)

In this section, you can set the stereo out fader, AUX master level, and effect return level.
A Mute button (mLAN8P only)
Press this button to mute the return signal from the internal multi-effect
processor.
B Effect RTN (mLAN8P only)
This knob adjusts the amount of signal processed by the effect processor
and routed to Stereo Out.
The mLAN8E features an AUX Layer button instead of this
button. When you turn this button on, you can set AUX 3-6
parameters for both input channels and the master track.
C
Link button
Set this button to ON to link the AUX 1 and 2 settings. When they are
linked, the panpot setting of the corresponding input channel is used.
This is useful when you wish to use AUX 1 and 2 as individual stereo
outputs.
D AUX 1/2 Master
These are used to adjust the level of the AUX 1 and 2 return signals.
When AUX Layer is turned on, you can set AUX 3-6 parame-
ters (mLAN8E).
E Mute button
Press this button to mute the stereo mix output.
F Balance
This knob adjusts the left and right balance of the stereo mix output.
G Stereo mix fader
This fader adjusts the level of the stereo mix signal. Click-and-hold the
mouse on the fader and slide the mouse up and down, or click the
desired point on the fader to move the fader to that point.
H
Level meter
The level meter is displayed on the right side of the fader. The meter
source signal is specified by the Mix Meter Source parameter.
9