Effect Editor Window; In Button; Out Button - Yamaha 01V96 Version 2 Manual

Effect Editor Window

The Effect Editor window enables you to edit the internal effects processors. To open the Effect Editor
window, choose [Effect Editor] from the [Windows] menu.
Note: You can open multiple Effect Editor windows by choosing [Windows] menu -> [Effect Editor] and
making a choice other than [Generic Editor]. The titles of these windows will indicate [Locked]. You can-
not open Library windows from windows that are indicated as [Locked].
When you recall effects, windows that do not indicate "Locked" in the title will be recalled.
A
F
A
Effects processor select
These buttons are used to select the internal effects processors.
B
Effect select section
The EFFECT NAME, TYPE, and IN/OUT are the name, type and I/O configuration of the effect
recalled to the currently selected effects processor. To edit the EFFECT NAME, click it and type. The
[LIBRARY] button opens the Effects Library window.
C
[IN] button
This button is used to set the metering position to the effects processor's inputs.
D
[OUT] button
This button is used to set the metering position to the effects processor's outputs.
E
Meters
These are input or output meters for the currently selected effects processor.
F
Effect parameter section
This section contains the various effects controls, buttons, and displays. Its layout depends on the
selected effect type.
G
[MIX BALANCE] control
This control enables you to adjust the balance between the wet and dry signals. When set to 0, only the
dry signal is heard. When set to 100, only the wet signal is heard.
H
[BYPASS] button
This button is used to bypass the currently selected effects processor.
B 3 4
G H
01V96 Editor—Owner's Manual
5
29