Output Channels - Yamaha DM 1000 Owner's Manual

12
Chapter 2—Console Window

Output Channels

When the Master Layer is selected, the Bus Out and Aux Send channels are displayed. A Bus
Out channel is shown here. Aux Send channels appear the same except that they do not have
a STEREO button.
Studio Manager for DM1000—Owner's Manual
A
STEREO button (Bus Out only)
This button is used to route the Bus Out to the Stereo Out.
B
INSERT button
This button is used to turn on and off the Bus Out's Insert.
1
C
COMP button
This button is used to turn on and off the Bus Out's Compressor.
D
2 Compressor curve
This display shows the Compressor's curve.
E
EQ button
C
This button is used to turn on and off the Bus Out's EQ.
D
F
EQ curve
5
This display shows the Equalizer's curve, which can be set by
6 dragging.
7
G
DELAY button
8
This button is used to turn on and off the Bus Out's Delay func-
I
tion.
H
Delay parameter
This parameter is used to set the delay time of the Delay func-
tion. Delay times can be set by dragging.
I
Channel number
This is the channel number.
J
AUTO button
This button displays the Automix status of the Bus Out.
J
K
K
SELECT button
L
This button is used to select the Bus Out.
M
N
L
SOLO button
This button solos the Bus Out. It appears orange while the Bus
O
Out is soloed.
M
ON button
This button turns the Bus Out on and off. It appears orange
while the Bus Out is on.
N
Short channel name
P
This is the channel's short name. To edit the name, click it and
type.
O
Channel fader
This is the Bus Out's fader.
P
Channel meter
This meter displays the signal level of the Bus Out.