Output Channels; Insert Button - Yamaha DM2000 Owner's Manual

Output Channels

When the Master Layer is selected, the Bus Out, Aux Send, and Matrix Send channels are
displayed. A Bus Out channel is shown here. Aux Send and Matrix Send channels appear
the same except that they do not have a STEREO button.
1
2
C
D
5
6
7
8
I
J
K
L
M
N
O
P
A
STEREO button (Bus Out only)
This button is used to route the Bus Out to the Stereo Out.
B

INSERT button

This button is used to turn on and off the Bus Out's Insert.
C
COMP button
This button is used to turn on and off the Bus Out's Compressor.
D
Compressor curve
This display shows the Compressor's curve.
E
EQ button
This button is used to turn on and off the Bus Out's EQ.
F
EQ curve
This display shows the Equalizer's curve, which can be set by
dragging.
G
DELAY button
This button is used to turn on and off the Bus Out's Delay func-
tion.
H
Delay parameter
This parameter is used to set the delay time of the Delay func-
tion. Delay times can be set by dragging.
I
Channel number
This is the channel number.
J
AUTO button
This button displays the Automix status of the Bus Out.
K
SELECT button
This button is used to select the Bus Out.
L
SOLO button
This button solos the Bus Out. It appears orange while the Bus
Out is soloed.
M
ON button
This button turns the Bus Out on and off. It appears orange
while the channel is on.
N
Short channel name
This is the channel's short name. To edit the name, click it and
type.
O
Channel fader
This is the Bus Out's fader.
P
Channel meter
This meter displays the signal level of the Bus Out.
Studio Manager for DM2000 V1.1—Owner's Manual
Output Channels
8