Starting The An Expert Editor - Yamaha PLG150-AN Owner's Manual

Analog physical modeling plug-in board modular synthesis plug-in system

Hide thumbs Also See for PLG150-AN:

Table of Contents

Installing and Starting the Plug-in Editor Software (Windows 95/98)

Starting the AN Expert Editor

Start XGworks (or XGworks lite).

Click the "Plug-in" menu and select "AN

Expert Editor."

Alternately, press Alt + P, then A (twice), and ENTER.

The "Select AN Part" dialog box appears.

Set the desired Part number and click "OK."

The AN Expert Editor window appears.

If the PLG150-AN has been properly installed and all computer/MIDI connections have been

properly made, operating the AN Expert Editor should directly affect the PLG150-AN. For

details on using the AN Expert Editor, refer to the on-line help ﬁle that is included with the soft-

ware.

To use the AN Expert Editor, your copy of XGworks must be version 1.05 or later.

You can download the proper update of XGworks or XGworks lite from the Yamaha website

(http://www.yamaha.co.uk).

When using a Modular Synthesis Plug-in System "mother" device, the Part assignment depends on

which mode is used — Voice or Performance — and also on whether the PLG150-AN board is

installed/assigned to PLG1 or PLG2, as described below.

When using the Voice mode:

Depending on which slot the PLG150-AN board has been installed to, press PLG1 or PLG2,

then set the Part to "1" (no matter what the PLG1 or PLG2 assignment is).

When using the Performance (Multi) mode:

If the PLG150-AN board is assigned to PLG1, set the Part to "16."

If the PLG150-AN board is assigned to PLG2, set the Part to "15."

Table of Contents