Starting The Lake Controller; Placing Modules - Yamaha MY8-LAKE Owner's Manual

card. The post-crossover signals can be
routed back to the host or out to the AES/
EBU connector. In case of routing back to
the host, patch the corresponding channels
of the SLOT to the Insert In of any empty
output channels. If any input channels are
available instead, you can also patch to the
input ports and directly output the signals
via Direct Out.
NOTE
For details about the console settings, refer to
the owner's manual supplied with your host
device.
Starting the Lake
Controller
To start the Lake Controller with an online
MY8-LAKE card connected for the first time,
follow the steps below.
1.
Double-tap (click) the Lake
Controller icon on the Windows
desktop.
2.
If the Select Network Adapter
dialog appears, select the
relevant network adapter for the
MY8-LAKE connection from the
list and tap [Select Adapter].
3.
Tap [No] if prompted to recall the
last system configuration.
NOTE
•
After a proper network configuration
and a valid Network connection are
established, your MY8-LAKE card is
now online and can be controlled using
the Lake Controller software.
•
Ensure that the Lake Controller is
allowed full access through the
Windows firewall.

Placing Modules

The default configuration for the MY8-LAKE
is eight Mesa EQ modules, providing a total
of eight discrete module inputs and outputs.
For instructions on changing the
configuration, refer to "Changing the MY8-
LAKE Frame Configuration" on page 21.
1.
Tap the [Modules] button from
the main Home screen to call up
the module scroll bar.
Modules button
MY8-LAKE Owner's Manual 13