Yamaha PLG150-AN Owner's Manual page 55

2.2.3 AN1x bulk dump
The AN1x bulk dump messages are received and changed as data of the
PLG150-AN.
11110000 F0H
43H
01000011
0NH
0000nnnn
5CH
01011100
SSH
0sssssss
0ttttttt TTH
GGH
0ggggggg
0mmmmmmm MMH
LLH
0lllllll
VVH
0vvvvvvv
: :
KKH
0kkkkkkk
11110111 F7H
The details are the same as for 2.2.1 XF Bulk Dump. However, see Table
<3-1> for the Base address.
More details (Address, Byte Count, etc.), see the AN1x parameter list
included with the AN1x.
2.2.3.1 AN1x System bulk dump
When the System block bulk data is received from the AN1x, the PLG150-
AN responds to it.
The following parameters are reacted by the PLG150-AN.
Keyboard Velocity Curve
Keyboard Fixed Veleocity
Keyboard Transmit Channel
Arpeggio/StepSEQ Transmit Channel
Receive Channel 1
Receive Channel 2
Midi Device Number
Midi Local
2.2.3.2 AN1x Current Common bulk dump
When the Common block bulk data of the voice sounds currenly is received
from the AN1x, the PLG150-AN responds to it (see the Table <3-1>).
The following parameters are invalid on the PLG150-AN, or affect differ-
ently compared with the ones applied to the AN1x.
Scene Select (Always "Scene1" is fixed.)
Layer Mode ("Single" or "Unison")
Layer Pan, Layer Separation
<1-1>
Parameter Base Address
MODEL ID = 4C
Parameter Address
(H) (M)
XG SYSTEM 00 00
00 00
00 00
MULTI PART 08 00
: :
08 0F
MULTI PART 0A 00
(additional) : :
0A 0F
PART ASSIGN 70 03
<1-2>
MIDI Parameter Change table ( XG SYSTEM )
Address Size Data
(H) (H) (H)
0 0 0 4 00 - 0F
1 00 - 0F
2 00 - 0F
3 00 - 0F
4 1 00 - 7F
5 1 00 - 7F
6 1 28 - 58
7D 1
7E 1 0
7F 1 0
TOTAL SIZE 7
** Processed on the XG platform side (MU128, MU100, etc.)
Exclusive status
YAMAHA ID
N:Device Number
Model ID
ByteCountMSB
ByteCountLSB
Address High
Address Mid
Address Low
Data
Check-sum
End of Exclusive
Description
(L)
00 System
7E XG System On
7F All Parameter Reset
00 Multi Part 1
: :
00 Multi Part 16
00 Multi Part 1
: :
00 Multi Part 16
nn PLG150-AN Part Assign
( nn = PLG150-AN serial number )
Parameter
MASTER TUNE
MASTER VOLUME**
MASTER ATTENUATOR**
TRANSPOSE
NOT USED
XG SYSTEM ON
ALL PARAMETER RESET
Common Vtrl Matrix 1—2 Data (Source, Parameter, Depth)
Vari-Ef Type (Always "Gutar Amp.Simulator" is fixed.)
Dly-Ef, Rev-Ef Data (Type, Return, Parameter 1—7)
Arpeggio/StepSEQ Scene Sw. ("Off" or "On (only Scene1-side)")
FreeEG Track Scene Switch ("Off or "On (only Scene1-side)")
2.2.3.3 AN1x Current Scene1 bulk dump
When the Scene1 block bulk data of the voice sounds currenly is received
from the AN1x, the PLG150-AN responds to it (see the Table <3-1>).
The following parameters are reacted by the PLG150-AN.
Ctrl Matrix 16 Data (Source, Parameter, Depth)
2.2.3.4 AN1x Current Step Seq Pattern bulk dump
When the Step SEQ block of the voice sounds currenly is received from the
AN1x, the PLG150-AN responds to it (see the Table <3-1>).
2.2.3.5 AN1x User Pattern bulk dump
When the User Step Seq Pattern block bulk data is received from the AN1x,
the PLG150-AN responds to it (see the Table <3-1>).
2.2.3.6 AN1x User Voice bulk dump
When the User Voice block bulk data is received from the AN1x, the
PLG150-AN responds to it (see the Table <3-1>).
The following parameters are invalid on the PLG150-AN, or affect differ-
ently compared with the ones applied to the AN1x.
Data of Scene 2
Common Data (See 2.2.3.2)
Scene1 Data (See 2.2.3.3)
3. Realtime Messages
3.1 Active Sensing
a) Send
This is not transmitted.
b) Receive
After FE is received one time, if the MIDI signal does not come within 400
msec, PLG150-AN will act the same as when ALL SOUND OFF, ALL
NOTE OFF, and RESET ALL CONTROLLERS are received, and return
to the condition where has not been received once.
Description
-102.4...0...+102.3[cent]
1st bit3-0mbit15-12
2nd bit3-0mbit11-8
3rd bit3-0mbit7-4
4th bit3-0mbit3-0
0...127
0...127
-24...0...+24[semitones]
00=XG system ON (receive only)
00=ON (receive only)
MIDI Data Format
Default
(H)
00 04 00 00
7F
0
40
—
—
55