Table of Contents
Advertisement
Parameters
FEG Sustin (Filter EG Sustain Level)
Range: -64 — +63
This determines the level of sustain of the FEG, which is the fixed level of the cutoff frequency main-
tained as long as the key is held. Higher values increase the Sustain level.
FEG Releas (Filter EG Release Time)
Range: -64 — +63
This determines the release time of the FEG, which is the time it takes for the filter to reach a level of
"0" after a key is released (key off). Higher values increase the Release time.
VCA AmodDp (VCA Amplitude Modulation Depth)
Range: -64 — +63
This determines the depth of the amplitude modulation of the VCA by the LFO1 or LFO2 (depending
on the voice selected). Amplitude Modulation adds a cyclical change to the volume level to create a
tremolo effect. Higher (positive) values widen the range of the volume change.
AEG Attack (Amplitude EG Attack Time)
Range: -64 — +63
This determines the attack time of the AEG, which is the time it takes for the signal to reach its maxi-
mum volume level after a key is pressed (key on). Higher values produce a longer Attack time.
AEG Decay (Amplitude EG Decay Time)
Range: -64 — +63
This determines the decay time of the AEG, which is the time it takes for the signal to reach its sustain
level from the maximum level while a key is held. Higher values produce a longer Decay time.
AEG Sustin (Amplitude EG Sustain Level)
Range: -64 — +63
This determines the level of sustain of the AEG, which is the level at which the volume will be main-
tained as long as the key is held. Higher values increase the Sustain level.
AEG Releas (Amplitude EG Release Time)
Range: -64 — +63
This determines the release time of the AEG, which is the time it takes for the signal to reach a level of
"0" after a key is released (key off). Higher values increase the Release time.
33
Advertisement
Table of Contents
