Table of Contents
Advertisement
Selecting/Editing the AN System Parameters
(Modular Synthesis Plug-in System)
The example displays used in the following explanations are all taken from the CS6x.
1
Press the UTILITY button.
The Utility Mode display appears.
2
Turn the PAGE knob clockwise until "PLG150-AN" is shown at the bottom
left of the display.
Keep turning the knob to select the different AN System parameters, indicated just above knob C
and knob 2.
3
Use knobs C and 2 to select the desired AN System parameter and change
the value.
Once one of the parameters is selected (the arrow cursor appears next to the value), you can also
adjust the value with the DATA knob or the DEC/INC buttons.
22
MSTR TG)
Vol
Sys
127
PLG1 MIDI)
Mrph CtrlNo
PLG150-AN
NtShift
Tune
+ 0 +
0.0c
Mrph Pgm No
0
0
Advertisement
Table of Contents
