Table of Contents
Advertisement
ML-85G IB(SSA)
2/9/99 11:15 AM
10
Page wp2-7
Auto Form-Feed After
This spin box lets you select the amount of time that the PCL remains idle before it
resets and prints data in its buffer. Changes you make with this control are not sent
to the PCL interpreter until the Send button is pressed.
Auto-Continue
By selecting this check box, the PCL Front Panel tells the printer to automatically
print the job regardless of any error messages, such as out of memory, which may
occur, causing the printer to print incomplete or poorly formatted pages.
Test Page Button
Pressing the Test Page button invokes the PCL Test Page dialog box. You are given
the choice of printing a test or font page. After the test page prints, you are
returned to the PCLEFP.
Test Page
When this button is pressed, a command is sent to the PCL
interpreter, causing a test page to print. The dialog box closes after
the Test Page button is pressed, and you are returned to the PCL
Front Panel Settings dialog box, with the Test Page
button highlighted.
Font Page When pressed, the PCL interpreter prints one (or more) pages listing
the fonts contained in the PCL interpreter. The dialog box closes
after the Font Page button is pressed, and you are returned to the
PCL Front Panel Settings dialog box with the Test Page button high
lighted.
Cancel
The PCL Test Page dialog box closes, and you are returned to the
PCL Front Panel settings dialog box with the Test Page button high
lighted.
- Windows Printing System-
2-7
Advertisement
Chapters
Table of Contents
