Related Manuals for Samsung ML-85G
Summary of Contents for Samsung ML-85G
-
Page 1: Installation Guide
01ML-85G/85G 99.2.18 12:2 PM ‰¿Ã¡ˆ2 Installation Guide ML-85G/85G plus P/N. JC68-60945A... -
Page 2: Table Of Contents
Connecting Computer and Power Cables..... . 3 Installing Printer Driver and Printing ......4 Printing (Windows ®... -
Page 3: Installing The Toner Cartridge
01ML-85G/85G 99.2.18 12:2 PM ‰¿Ã¡ˆ6 Installing the Toner Cartridge - Remove contents and packing material. Place the cartridge on a Open the Top Cover by stable surface, then pull out pressing the release button. the tape attached to top of cartridge, as shown. -
Page 4: Connecting Computer And Power Cables
- Be sure to remove power from both computer and printer. Connect printer to computer. • A printer cable is not included with the printer, and must be supplied by the user. • For best performance, use a good quality shielded cable with IEEE 1284-compatible pin configuration (Centronics). -
Page 5: Printing (Windows 95)
Printing (Windows 95) Installing driver Turn on printer and computer. When Windows 95 senses the printer and alerts you with the message below, click OK. • If no message appears: Select Run under Start menu and type a:\setup (or b:\setup) on the command line, then press Enter. -
Page 6: Setting As Default Printer
Printing (Windows 95) The following sample instructions show how to print using Microsoft Double-click the Open the file you want to ML-85G/85G plus icon. print. Enter the number of copies and pages to print, and click OK. Set as default printer. -
Page 7: Uninstalling Drivers
01ML-85G/85G 99.2.18 12:2 PM ‰¿Ã¡ˆ14 Windows 95 Uninstalling driver Select ML-85G&85G plus uninstaller. Turn on printer and computer. Click Yes. Insert diskette #1 into the drive. Uninstaller removes printer Type a:\setup (or b:\setup) on driver program, and restarts the command line, then Windows 95. -
Page 8: Setting As Default Printer
Finish. • Setup exits, and Windows restarts. Setting as default printer Setup resumes the Double-click the Printers icon installation. in Control Panel. Printing (Windows 3.x) Select ML-85G/85G plus, click Set As Default Printer, then Close. Set as default printer. -
Page 9: Printing
Uninstall the previous printer driver (see next page), then re-install it. Uninstalling driver Select Print from the Open Program Manager and File menu. double-click the ML-85G/85G plus uninstaller. Windows 3.x Click Yes. Uninstaller removes printer driver program and restarts Windows. -
Page 10: Printing To A Network Printer
Panel, and double-click the check box(es), then click OK. Network icon. Click the Sharing tab, check Shared As, fill in the Shared Name field, and click OK. Click Start menu and select Printers in Settings, then double- click the ML-85G/85G plus. Finish... -
Page 11: Client Pc Sharing Setup
02ML-85G/85G 99.2.18 12:6 PM ‰¿Ã¡ˆ6 Printing on a network printer Installing driver onto a client PC Before setting up sharing, printer driver should be installed. See pages 5 through 14. Click Start menu, select Control Panel, then double-click Printer. Printing on a network printer...