Installing Dvc Media 4.0 Program (Vp-D590/D590I/D590T/D590Ti Only); Instalace Programu Dvc Media 4.0 (Pouze Modely Vp-D590/D590I/D590T/D590Ti) - Samsung VP-D530 Owner's Instruction Book

ENGLISH
USB interface
(VP-D590/D590i/D590T/D590Ti only)
Installing DVC Media 4.0 Program
Do not connect the camcorder to PC before installing the
program.
If another camera or scanner is connected, please disconnect
it in advance.
This explanation is based on Windows
Program installation
1. Insert the software CD into CD-ROM drive.
- Installation selection screen appears
in the monitor.
2. If the installation selection screen does not
appear after inserting CD click "Run" on the
Windows "Start" menu and execute
SETUP.EXE file to begin installation.
- When CD-ROM drive is set to
"D:" drive: type "D:\setup.exe" and press Enter.
3. Click a button to install the selected software.
DVC Driver
USB Software
Editing Software
Install the DVC Driver
4. When you see the Start window, click "DVC Driver" to continue
installation.
Rozhraní USB
Instalace programu DVC Media 4.0
Pfied instalací programu nepfiipojujte video kameru k PC.
JestliÏe máte k PC pfiipojenu dal‰í kameru nebo scanner, prosím
pfiedem je odpojte.
Toto vysvûtlení je na základû údajÛ uveden˘ch u OS
® 98SE OS. Windows
Instalace programu
1.
- KdyÏ má CD-ROM mechanika pfiifiazeno písmeno "D", napi‰te:
"D:\setup.exe" a stisknûte klávesu ENTER.
3. Klepnûte na tlaãítko k instalaci zvoleného softwaru:
ovladaãe DVC
softwaru USB
editaãního softwaru
Instalujte ovladaã DVC
4. KdyÏ uvidíte dialogov˘ rámeãek Start, klepnûte na poloÏku
"DVC driver" k pokraãování instalace.
(pouze modely VP-D590/D590i/D590T/D590Ti)
® 98SE.
1. VloÏte pfiiloÏené CD se softwarem do
CD-ROM mechaniky.
- Na monitoru se zobrazí volby instalace.
2. JestliÏe se po vloÏení CD zobrazení voleb
neobjeví, klepnûte na poloÏku "Run"
("Spustit") na nabídce Start OS Windows a
spu‰tûním souboru SETUP.EXE zaãne
instalace.
CZECH
83 83