Codec Settings For G729A Only - Panasonic KX-TGP500B04 Administrator's Manual

8.2.1 Codec Settings for G729A only

SUB_INTERVAL_RATE_2="90"
SIP_OUTPROXY_ADDR_2=""
SIP_OUTPROXY_PORT_2="5060"
SIP_TRANSPORT_2="0"
SIP_ANM_DISPNAME_2="1"
SIP_ANM_USERNAME_2="0"
SIP_ANM_HOSTNAME_2="N"
SIP_DETECT_SSAF_2="N"
SIP_RCV_DET_HEADER_2="N"
PHONE_NUMBER_2="1234567891"
LINE_ID_2=""
DISPLAY_NAME_2="1234567891"
#----------------------------------------------------------#
# Settings for line 3 to 8 follows... #
#----------------------------------------------------------#
8.2.1 Codec Settings for G729A only
By specifying the configuration parameters as shown in the following example, you can use only "G729A" for
line 1 as the codec settings.
Example
SDP_CODEC0_1="G729A"
SDP_CODEC1_1=""
SDP_CODEC2_1=""
SDP_CODEC3_1=""
SDP_CODEC4_1=""
SDP_PTYPE0_1="18"
SDP_PTYPE1_1="255"
SDP_PTYPE2_1="255"
SDP_PTYPE3_1="255"
SDP_PTYPE4_1="255"
CODEC_G711_REQ="0"
Note
•
If you use only "G729A" for lines 2–8, specify the same settings by changing the suffix "_1" to
"_2"–"_8".
•
This listing shows the parameters required for setting "G729A" only. For details about the other settings,
see 8.2 Comprehensive Example of the Configuration File.
236 Administrator Guide Document Version 2010-08