Global Ip Address; Enable Global Ip Address Usage Per Line; Line 1-Line 8; External Rtp Port - Panasonic KX-TGP500B04 Administrator's Manual

3.4.5 Static NAPT Settings

3.4.5.1 Global IP Address

Global IP Address
Description
Value Range
Default Value

3.4.5.2 Enable Global IP Address Usage per Line

Line 1–Line 8
Description
Value Range
Default Value

3.4.5.3 External RTP Port

Channel 1–3
Description
Value Range
Default Value
74 Administrator Guide
Specifies the global IP address of your network.
Note
•
You must enter a value in this field if at least 1 of [Line 1]–
[Line 8] is set to [Yes], or when port numbers are specified in
[Channel 1–3].
•
The global IP address will reflect SIP messages and RTP
packets.
IP address in dotted-decimal notation ("n.n.n.n" [n=0-255])
Not stored.
Selects whether to enable the NAT Traversal feature for each line.
•
Yes
•
No
No
Specifies the external RTP port number used for voice communication
for each channel.
0, 1024–49150 (0: Disable, even number only)
Note
•
Each channel must be set to a unique port number, and all port
numbers must be an even number.
•
You cannot specify here the same port number as any of the
port numbers specified for the individual lines in [Source
Port] in 3.6.2.5 SIP Source Port. In addition, you cannot
specify a port number that is 1 less than a port number specified
in [Source Port] if the source port number is an odd number.
•
All 3 channels must be set to either enable or disable at the
same time.
0
Document Version 2010-08