Codec Settings For G729A Only - Panasonic KX-TGP500 Administrator's Manual

8.2.1 Codec Settings for G729A only

SIP_2NDRGSTR_ADDR_2=""
SIP_2NDRGSTR_PORT_2="5060"
SIP_TIMER_T1_2="500"
SIP_TIMER_T2_2="4"
INVITE_RTXN_2="6"
OTHER_RTXN_2="10"
SIP_FOVR_NORSP_2="N"
SIP_FOVR_MAX_2="2"
SIP_DNSSRV_ENA_2="N"
SIP_UDP_SRV_PREFIX_2="_sip._udp."
SIP_TCP_SRV_PREFIX_2="_sip._tcp."
SIP_100REL_ENABLE_2="N"
SIP_18X_RTX_INTVL_2="0"
SIP_PRSNC_ADDR_2="presenceserver.example.com"
SIP_PRSNC_PORT_2="5060"
SIP_2NDPRSNC_ADDR_2=""
SIP_2NDPRSNC_PORT_2="5060"
USE_DEL_REG_OPEN_2="N"
USE_DEL_REG_CLOSE_2="N"
PORT_PUNCH_INTVL_2="0"
SIP_SUBS_EXPIRE_2="3600"
SUB_RTX_INTVL_2="10"
REG_RTX_INTVL_2="10"
SIP_P_PREFERRED_ID_2="N"
SIP_PRIVACY_2="N"
ADD_USER_PHONE_2="N"
SDP_USER_ID_2="-"
SUB_INTERVAL_RATE_2="90"
SIP_OUTPROXY_ADDR_2=""
SIP_OUTPROXY_PORT_2="5060"
SIP_TRANSPORT_2="0"
SIP_ANM_DISPNAME_2="1"
SIP_ANM_USERNAME_2="0"
SIP_ANM_HOSTNAME_2="N"
SIP_DETECT_SSAF_2="N"
SIP_RCV_DET_HEADER_2="N"
SIP_CONTACT_ON_ACK_2="N"
PHONE_NUMBER_2="1234567891"
LINE_ID_2=""
DISPLAY_NAME_2="1234567891"
#----------------------------------------------------------#
# Settings for line 3 to 8 follows... #
#----------------------------------------------------------#
8.2.1 Codec Settings for G729A only
By specifying the configuration parameters as shown in the following example, you can use only "G729A" for
line 1 as the codec settings.
Example
SDP_CODEC0_1="G729A"
SDP_CODEC1_1=""
SDP_CODEC2_1=""
238 Administrator Guide Document Version 2011-01