STATUS Indicator (in cases when buttons/soft key icons are shown in English alphabet) or
Indicator (in cases when buttons/soft key icons are shown in symbols/pictures)
Problem
The STATUS indicator or
continues flashing in amber.
The STATUS indicator or
flashes in amber rapidly although the IP
address was acquired.
Document Version
2010-08
•
An IP address may not have been acquired or the static IP
indicator
address is not appropriate. Check the unit's IP address:
In cases when buttons/soft key icons are shown in
English alphabet
Base unit (KX-TGP550 only):
[MENU] (middle soft key) ® [#][5][0][1]
Handset:
[MENU] (center of joystick) ® [#][5][0][1]
In cases when buttons/soft key icons are shown in
symbols/pictures
Base unit (KX-TGP550 only):
Handset:
It is recommended to perform the following.
–
If necessary, change the unit's static IP address.
–
If an IP address was not acquired, check your network
devices' (router, modem, etc.) connections. If the
connections are made properly but the problem
persists, check your network devices' (router, modem,
etc.) settings.
•
Many installation issues can be resolved by resetting all
the equipment. First, shut down your modem, router, hub,
base unit, and PC. Then turn the devices back on, one at
a time, in this order: modem, router, hub, base unit, PC.
•
If you cannot access Internet Web pages using your PC,
check to see if your phone system is having connection
issues in your area.
•
Check the VoIP status in the Web user interface and
confirm that each line is registered properly (® see To
check the setting status in the Web user interface in
this section).
Even when one line fails to register, the indicator will flash
in amber.
•
Check that the SIP server address, URLs of the
configuration files, encryption key, and other required
settings are correct.
•
Check the firewall and port forwarding settings on the
router (® see 1.1.10 Other Network Settings).
•
For details about settings, consult your network
administrator or phone system dealer.
•
Unplug the unit's AC adaptor to reset the unit, then
indicator
reconnect the AC adaptor. If the STATUS indicator or
indicator is still flashing in amber rapidly, there may be
a problem with the base unit hardware. Contact your phone
system dealer.
Cause/Solution
(middle soft key) ® [#][5][0][1]
(center of joystick) ® [#][5][0][1]
7.1 Troubleshooting
Administrator Guide
221