Value Range
Default Value
Configuration File Reference
3.7 Telephone
This section provides detailed descriptions about all the settings classified under the [Telephone] tab.
3.7.1 Multi Number Settings
This screen allows you to assign phone numbers for incoming and outgoing calls to the base unit
(KX-TGP550 only) and handsets.
A maximum of 8 phone numbers can be assigned for each unit. A maximum of 6 handsets can be registered
to the base unit. For details, see 5.1 Line Settings for Base Unit and Handset.
Note
•
You can configure these settings even in the following cases:
–
The line has not been leased, or the unit has not been configured yet.
Document Version
2010-08
•
G722
•
PCMA (G.711 A-law)
•
G726-32 (G.726 [32k])
•
G729A
•
PCMU (G.711 µ-law)
Note
•
You can select each codec on once within [CODEC Settings].
•
A maximum of 5 priorities can be assigned. If only 4 codecs are
specified in a configuration file, you will be able to select from
only 4 codecs, and [Fifth CODEC] will be disabled.
•
The codec selections that are displayed may vary depending
on the unit or the operating environment.
PCMU
SDP_CODEC[0–4]_[1–8] (Page 169)
3.7.1 Multi Number Settings
Administrator Guide
101