Cfg_Root_Certificate_Path; Time Adjust Settings; Ntp_Addr - Panasonic KX-TGP500B04 Administrator's Manual

4.4.5 Time Adjust Settings

Value Range
Default Value

CFG_ROOT_CERTIFICATE_PATH

Value Format
Description
Value Range
Default Value
4.4.5 Time Adjust Settings

NTP_ADDR

Value Format
Description
Value Range
Default Value
Web User Interface Reference
160 Administrator Guide
•
0 (No verification of root certificate)
•
1 (Simple verification of root certificate)
•
2 (Precise verification of root certificate)
Note
•
If set to "0", the verification of the root certificate is disabled.
•
If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate's date, certificate's chain,
and the confirmation of the root certificate will be verified.
•
If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
0
String
Specifies the URI of the root certificate.
Note
•
Changing this setting may require restarting the unit.
Max. 255 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 64 characters.
–
"<password>" must be less than 64 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<schema>://" and "<host>:<port>/<url-path>"
must be less than 128 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
Empty string
String
Specifies the IP address or FQDN of the NTP server.
Max. 127 characters (IP address in dotted-decimal notation or FQDN)
Empty string
NTP Server Address (Page 80)
Document Version 2010-08