Firm_File_Path; Provisioning Settings; Option66_Enable - Panasonic KX-TGP500B04 Administrator's Manual

FIRM_FILE_PATH

Value Format
Description
Value Range
Default Value
Web User Interface Reference

4.3.5 Provisioning Settings

OPTION66_ENABLE

Value Format
Description
Document Version 2010-08
String
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
•
Changing this setting may require restarting the unit.
Max. 255 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>".
–
"<user>" must be less than 64 characters.
–
"<password>" must be less than 64 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<schema>://" and "<host>:<port>/<url-path>"
must be less than 128 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with either
"FIRM_VER_EUDECT" or "FIRM_VER_USDECT" depending on
the system. Note that this rule differs from other parameters
such as "SIP_USER_AGENT".
Empty string
Firmware File URL (Page 122)
Boolean
Specifies whether to enable the unit to look for option 66 to receive the
TFTP server address or FQDN from the DHCP server.
Note
•
The unit will try to download configuration files through the
TFTP server, the IP address or FQDN of which is specified in
the option number 66 field.
4.3.5 Provisioning Settings
Administrator Guide 145