4.7.2 SIP Settings
Description
Value Range
Default Value
USE_DEL_REG_CLOSE_[1–8]
Parameter Name Example
Value Format
Description
Value Range
Default Value
PORT_PUNCH_INTVL_[1–8]
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SIP_SUBS_EXPIRE_[1–8]
Parameter Name Example
192
Administrator Guide
Specifies whether to enable cancelation before registration when, for
example, the unit is turned on.
•
Y (Enable cancelation before registration)
•
N (Disable cancelation before registration)
N
USE_DEL_REG_CLOSE_1, USE_DEL_REG_CLOSE_2, ...,
USE_DEL_REG_CLOSE_8
Boolean
Specifies whether to enable the cancelation of registration before the
SIP function shuts down when, for example, the configuration has
changed.
•
Y (Enable registration cancelation before shutting down)
•
N (Disable registration cancelation before shutting down)
Note
•
If set to "Y", registration cancelation is enabled.
•
If set to "N", registration cancelation is disabled even when the
SIP stack is shutting down.
N
PORT_PUNCH_INTVL_1, PORT_PUNCH_INTVL_2, ...,
PORT_PUNCH_INTVL_8
Integer
Specifies the interval, in seconds, between transmissions of the Keep
Alive packet to the unit in order to maintain the NAT binding information.
Note
•
This setting is available only when "SIP_TRANSPORT_[1–
8]" is set to "0" for UDP.
0, 10–300 (0: Disable)
0
Keep Alive Interval (Page 92)
SIP_SUBS_EXPIRE_1, SIP_SUBS_EXPIRE_2, ...,
SIP_SUBS_EXPIRE_8
Document Version
2010-08