Idrac Settings Utility; Entering The Idrac Settings Utility - Dell PowerEdge M420 Owner's Manual
Dell poweredge m420 systems owner's manual
Hide thumbs
Also See for PowerEdge M420:
- Reference manual (1682 pages) ,
- Configuration manual (1246 pages) ,
- Getting started manual (202 pages)
Table of Contents
Advertisement
iDRAC Settings Utility
The iDRAC Settings utility is an interface to setup and configure the iDRAC parameters using UEFI. You can enable or
disable various iDRAC parameters using the iDRAC7 Settings Utility, for example:
NOTE: Some of the features mentioned in the list may require the iDRAC7 Enterprise License upgrade.
•
Configure, enable, or disable the iDRAC local area network through the dedicated iDRAC Enterprise card port or
the embedded NIC
•
Enable or disable IPMI over LAN
•
Enable a LAN Platform Event Trap (PET) destination
•
Attach or detach the Virtual Media devices
For more information on using iDRAC7, see the iDRAC7 User's Guide, at support.dell.com/manuals.
Entering The iDRAC Settings Utility
1.
Turn on or restart the managed system.
2.
Press <F2> during Power-on Self-test (POST).
3.
In the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings page is displayed.
23
Advertisement
Table of Contents
Troubleshooting
