Dell PowerEdge M420 Owner's Manual page 93

Error Code Message Information
Action
PST0137
Message
LCD Message
Details
Action
PST0138
Message
LCD Message
Details
Action
PST0139
Message
LCD Message
Details
Action
PST0140
Message
LCD Message
Details
Action
PST0141
Message
LCD Message
Details
Action
PST0142
Message
LCD Message Memory initialization error.
Details
Action
PST0143
Message
LCD Message Intel Trusted Execution Technology (TXT) fatal error.
Remove and reapply input power. If the issue persists, see
Parity error.
Parity error. Power cycle system.
System BIOS detected a parity error during post.
Remove and reapply input power. If the issue persists, see
SuperIO failed.
SuperIO failure. Power cycle system.
System BIOS detected a failure with the SIO.
Remove and reapply input power. If the issue persists, see
Keyboard controller failed.
Keyboard controller failed. Power cycle system.
System BIOS detected a failure with the Keyboard Controller.
Remove and reapply input power. If the issue persists, see
System management interrupt initialization failed.
SMI initialization failed. Power cycle system.
System BIOS failed to initialize the system management interrupt.
Remove and reapply input power. If the issue persists, see
QuickPath Interconnect (QPI) fatal error.
QuickPath Interconnect (QPI) fatal error.
Quick Path Interconnect failed during system POST.
Reboot the system. If problem persists, remove input power and re-seat processors.
MRC fatal error.
BIOS Memory testing failed.
Compare system memory installation to supported system memory configurations.
Reduce system configuration to minimum memory configuration.
Intel Trusted Execution Technology (TXT) fatal error.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
93