Dell PowerEdge M420 Owner's Manual page 115

Error Code Message Information
Details
Action
VLT0218
Message
LCD Message The <
Details
Action
VLT0219
Message
LCD Message The <
Details
Action
VLT0220
Message
LCD Message The <
Details
Action
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is less than the lower warning threshold.
The <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is less than the lower critical threshold.
The <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is greater than the upper warning threshold.
The <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Getting Help.
Getting Help.
Getting Help.
Getting Help.
115