Dell PowerEdge M420 Owner's Manual page 110

Error Code Message Information
VLT0101
Message
LCD Message Processor module <
Details
Action
VLT0102
Message
LCD Message Processor module <
Details
Action
VLT0103
Message
LCD Message Processor module <
Details
Action
VLT0104
Message
LCD Message Processor module <
Details
Action
110
3. If the issue persists, see
name > voltage is less than the lower critical threshold.
Processor module <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
name > voltage is greater than the upper warning threshold.
Processor module <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
name > voltage is greater than the upper critical threshold.
Processor module <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
name > voltage is outside of the allowable range.
Processor module <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
Getting Help.
Getting Help.
Getting Help.
Getting Help.