Dell PowerEdge M420 Owner's Manual page 90

Error Code Message Information
PCI3006
Message
Details
Action
PCI3008
Message A non-fatal PCIe error detected on a component at bus <
<
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall the device at the next
service window.
PCI3010
Message A non-fatal IO error detected on a component at bus <
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall the device at the next
service window.
PCI3012
Message The QuickPath Interconnect (QPI) width degraded.
Details System performance may be degraded. The bus is not operating at maximum speed or
width.
Action Reset the system, if the problem persists reinstall processors.
PCI3014
Message A non-fatal PCIe error detected on a component at slot <
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall the device at the next
scheduled service time.
PDR0001
Message
LCD Message
Details
Action
PDR0002
Message A predictive failure detected on drive <
Details The controller received a SMART error from the drive. The drive is operational but needs
replacement.
Action The drive will need replacement at the next service window.
PDR0016
Message
LCD Message Drive <
90
Failed to get Link Tuning or FlexAddress data from iDRAC.
Either the BIOS or BMC/iDRAC firmware is out of date and does not support FlexAddress.
Update BIOS, and BMC/iDRAC firmware. If the issue persists, see
func >.
Fault detected on drive <
Fault detected on drive <
The controller detected a failure on the disk and has taken the disk offline.
Remove and re-seat the failed disk. If the issue persists, see
number > is removed.
Drive <
number > is removed. Check drive.
bus >device< device >function
bus >device< device >function < func >.
number >.
number >.
number >. Check drive.
number >.
Getting Help.
Getting Help.