Updated Components Dialog Box (Storage Subsystem Firmware) - HP 8/20q User Manual

• Storage subsystem firmware
• Switch firmware
• HBA driver
• Application deployment templates
Figure 98

Updated Components dialog box (storage subsystem firmware)

To update storage subsystem firmware:
1. On the Updated Components dialog box, choose one of the following options:
• To obtain the later firmware version, click Download Updates.
NOTE:
firmware. You must go to the HP website to obtain this firmware. Continue with
• To disregard the firmware update at this time (it will reappear the next time you start Simple SAN
Connection Manager), click Close.
• To prevent the firmware update prompt for the same firmware version from appearing the next time
you start Simple SAN Connection Manager, select the Do not show this screen if the difference in
version are the same next time SSCM starts check box, and then click Close.
2. If you choose to download the firmware update, follow these steps:
a. In the Browse for Folder dialog box, select a location for saving the file from the web, and then click
OK.
A message box directs you to a location on the HP website.
b. Make a note of this URL, and then click OK to close the message box.
c. Go to the specified HP web page, and then click Support & Drivers.
d. Locate your storage subsystem, download the newer firmware file, and then copy the file to the
location specified in
122 Managing Storage Subsystems
The Download Updates button does not actually download the new storage subsystem
step 2a.
step 2.