10 Managing Storage Subsystems
This chapter provides the procedures for managing your storage subsystems (storage arrays).
Viewing subsystem information
Simple SAN Connection Manager provides easy access to information about each subsystem within your
SAN.
To view information about a subsystem:
1.
In the navigation pane under Storage subsystem-Logical Disk View, click the subsystem you want to
view.
The content pane
Figure 91
Subsystem Information
The following read-only information is shown for the selected subsystem:
• Subsystem Information:
• Identifier
• Status
• Health
(Figure
91) shows the Subsystem Information.
HP StorageWorks Simple SAN Connection Manager User Guide 117