Storage Deployment Wizard: Select Servers (Template Deployment); Storage Deployment Wizard: Summary (Template Deployment) - HP 8/20q User Manual

Figure 103

Storage Deployment wizard: select servers (template deployment)

5. Under Server Name, select one or more check boxes indicating the server(s) to which you want to
assign (present) the logical disks in this storage subsystem, and then click Next.
NOTE:
in a clustered environment, you can select two or more servers. If you choose not to select any
servers, you must later manually assign the LUNs defined in this deployment to the servers (see
"Assigning and unassigning a logical disk to a server,"
Before proceeding with configuring the storage subsystem with the selected option, the wizard displays
a summary of the selection and resulting actions
Figure 104

Storage Deployment wizard: summary (template deployment)

6. Verify the information and then select one of the following options:
• To confirm and complete the wizard, click Deploy.
• To return to previous wizard windows and review or change your selections, click Back.
• To abandon all selections made using the Storage Deployment wizard, click Cancel.
If you click Deploy, using the HP SSSU or the subsystem VDS hardware provider, Simple SAN
Connection Manager initializes the subsystem, creates disk groups or storage pools and LUNs, and
presents those LUNs to the host(s) as specified in the deployment summary shown in
126 Managing Storage Subsystems
In general, you should select just one server. However, if each server represents one node
page 91).
(Figure 104).
Figure 104.