• Click Update HBA Driver to open the HBA Driver Update wizard (see
page 74).
16.
To exit this dialog box without performing any configuration, and view the Simple SAN Connection
Manager main window, click Close. (All configuration options offered on this dialog box are also
available from the main window.)
17.
A dialog box indicates when the last refresh of the SAN components was performed. Click OK.
Figure 21
Last Refresh of SAN Components dialog box
Now that you have completed the initial switch setup and other common configuration operations, you can
use Simple SAN Connection Manager to configure your SAN, as described in the remainder of this guide.
HP StorageWorks Simple SAN Connection Manager User Guide
"Updating an HBA driver,"
37