Set Switch Admin Password dialog box: new switch setup
Figure 15
8.
In the Set Switch Admin Password dialog box, complete the following steps:
a. Enter the Old Password (the factory default password for the switch is password).
b. Enter a New Password (at least 8 alphanumeric characters).
c. Re-enter the new password in the Verify Password box.
d. To set the switch admin password, click OK. To cancel password setup, click Cancel.
9.
A message box confirms successful password change completion. Click OK to close the message box.
The New Switch Setup dialog box shows a check mark next to the second step, "Set switch
administrator password,"
Figure 16
Second step of New Switch Setup completed
10.
A message box asks if you want to set the switch zoning. Choose one of the following options:
• To continue with the next step of switch setup, click Yes. The Set the Switch Default Zoning dialog
box
(Figure
17) opens. Go to
• To set the switch zoning later, click No. (See
(Figure
16) indicating that you have completed that task.
step
9.
"Setting the switch default zoning,"
HP StorageWorks Simple SAN Connection Manager User Guide
page 49.)
33