1 SAN/iQ release notes
Version
•
SAN/iQ software version 8.1.00.0047 [NSM 160, NSM 260, NSM 2060, NSM 4150, Dell
2950, DL 380, IBM x3650, NSM 2120, DL 320s, HP LeftHand P4500, HP LeftHand P4300,
VSA]
•
SAN/iQ software version 8.1.0.24 [Failover Manager ESX and non-ESX]
•
HP LeftHand Centralized Management Console version 8.1.00.0197
•
SAN/iQ Command Line Interface (Cliq) version 8.1.0.327
Updated software components in this release
This September 2009 8.1 release contains functionality to enable application-managed snapshots.
To use application-managed snapshots, you must be running SAN/iQ software version 8.x and
upgrade to the following software.
•
HP LeftHand Centralized Management Console version 8.1.00.0197
•
SAN/iQ Cliq version 8.1.0.327
•
Solution Pack version 8.1.0.63
VSS Provider version 8.1.0.227
Description
These release notes provide instructions for upgrading your software, and information about what
has been fixed in this release. These release notes are current as of the published date.
Supersedes
•
SAN/iQ software version 8.0.00.1682 [NSM 160, NSM 260, NSM 2060, NSM 4150, Dell
2950, DL 380, IBM x3650]
•
SAN/iQ software version 8.0.00.1704 [NSM 2120, DL 320s, NSM 2120 G2 and DL 185]
•
SAN/iQ software version 8.0.00.1712 [VSA]
•
SAN/iQ software version 8.0.0.107 [Failover Manager ESX and non-ESX]
•
Centralized Management Console version 8.1.00.0059
Platforms supported for this release
Upgrades to release 8.1 SAN/iQ software are available for the following platforms
•
NSM 160
•
NSM 260
•
NSM 2060
•
NSM 2120
SAN/iQ software release notes
5