Cf_Source Command; Cf_Input1 Command; Cf_Input2 Command - Canon LV-7565 Specification

Expand Serial Command Specification

8.6.2. CF_SOURCE Command

Command "CF_SOURCE_%1" [CR]
%1
Select current selected Input sauce. (Only valid when it is in the usual Power
On state)
Details
When selected Input does not meet the requirement for the specified %1, the
response will be "101" and the Command is not be executed.
Acceptable
Response
Unacceptable

8.6.3. CF_INPUT1 Command

Command "CF_INPUT1_%1" [CR]
"DIGITAL" -------- Select DVI Input
"ANALOG" ------- Select Analog Input
%1 "SCART" ---------- Select Scart Input
"HDCP" ----------- Select DVI HDCP Input
"OUT" ------------- Select Monitor Out
Select Input-1 and specified source by %1 at the same time. (Only valid when it
is in the usual Power On state)
Details
Note) When Input1 is set to Monitor OUT, the Command is valid and response
Acceptable
Response
Unacceptable

8.6.4. CF_INPUT2 Command

Command "CF_INPUT2_%1" [CR]
"VIDEO" ------------- Select Composite Video Input
%1 "YPBPR" ------------ Select Y/Pb/Pr Input
"ANALOG" --------- Select RGB Input
Select Input-2 and specified source by %1 at the same time. (Only valid when it
Details
is in the usual Power On state)
Acceptable
Response
Unacceptable
"DIGITAL" ---------- Select DVI Digital Input
"ANALOG" -------- Select Analog Input
Input: 1 "SCART" ----------- Select Scart Input
"HDCP" ------------- Select DVI HDCP Input
"OUT" ---------------- Select Monitor Out
"VIDEO" ------------- Select Composite Video Input
Input: 2 "YPBPR" ------------ Select Y/Pb/Pr Input
"ANALOG" --------- Select RGB Input
"VIDEO" ------------- Select Composite Video Input
Input: 3 "S-VIDEO" -------- Select S-Video Input
"YPBPR" ------------ Select Y/Pb/Pr Input
Input: 4 Not select source (Network only)
"000" [CR]
"%%%" [CR]
is error code, "101".
"000" [CR]
"%%%" [CR]
"000" [CR]
"%%%" [CR]
Page 22 of 46