Cf_Image Command; Cf_Imageadj Command; Cf_Apctrl Command; Cf_Colmnsav Command - Canon LV-7565 Specification

Expand Serial Command Specification

8.4.11. CF_IMAGE Command

Command "CF_IMAGE_%1" [CR]
When Input
is Computer
%1
When Input
is Video
Select Image mode. (When it is in usual Power On state, this is valid)
Parameter "CUSTOM1" is the same as selecting Custom on OSD menu. The
Details
value set by this Command is stored in EEEPROM. When All Off the Projector,
the setting will
Acceptable
Response
Unacceptable

8.4.12. CF_IMAGEADJ Command

Command "CF_IMAGEADJ_%1" [CR]
"RST" ------------- Reset Image adjustment
%1
"STR1" ------------ Store current Image adjustment to Custom
Reset and Store for Image adjustment. (When it is in usual Power On state,
this is valid)
Details "STR1" is the same as "Custom" when choosing "Store" on OSD menu.
The setting value set in "Custom" is stored, so even if the Projector is set to AC
Power Off and is turned on again, the setting value will be able to be back.
Acceptable
Response
Unacceptable

8.4.13. CF_APCTRL Command

Command "CF_APCTRL_%1" [CR]
"L1" ------------- Select Auto Picture Control L1
%1 "L2" ------------- Select Auto Picture Control L2
"OFF" ----------- Off Auto Picture Control
Details Set Auto Picture Control. (Only valid when it is in the usual Power On state)
Acceptable
Response
Unacceptable

8.4.14. CF_COLMNSAV Command

Command "CF_COLMNSAV_%1" [CR]
%1 "000" ~ "009" -------- Specify store area
Store current Color Management setting status to the area by %1 specification.
Details
(Only valid when it is in the usual Power On state)
Acceptable
Response
Unacceptable
"STAND" --------- Standard
"REAL" ----------- High contrast
"CUSTOM1" ---- Custom (The value which is adjusted and saved
by a user)
"STAND" --------- Standard
"CINEMA" ------- Cinema
"CUSTOM1" ---- Custom (The value which is adjusted and saved
by a user)
valid.
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 17 of 46