Other Status Read Command; Cr_Signal Command; Cr_Vmute Command - Canon LV-7565 Specification

Expand Serial Command Specification

9.12. Other Status Read Command

9.12.1. CR_SIGNAL Command

Command "CR_SIGNAL" [CR]
Details Read information if there is signal or not
Acceptable
Response
Unacceptable

9.12.2. CR_VMUTE Command

Command "CR_VMUTE" [CR]
Details Read No Show setting status
Acceptable
Response
Unacceptable
9.12.3. CR_FREEZE Command
Command "CR_FREEZE" [CR]
Details Read Freeze setting status
Acceptable
Response
Unacceptable
9.12.4. CR_PTIMER Command
Command "CR_PTIMER" [CR]
Details Read Presentation Timer status
Acceptable
Response
Unacceptable
9.12.5. CR_INFPFAIL Command
Command "CR_INFPFAIL" [CR]
Read the power failure status.
Data is shown in 32bits HEX
Details
Normal = All Hi (FF) Abnormal = All Lo (00)
Acceptable
Response
Unacceptable
"000_%1" [CR]
"ON" -------- There is signal
%1
"OFF" ------- No signal
"?" [CR]
"000_%1" [CR]
"ON" ---------- Selected No Show
%1
"OFF" --------- Canceled No Show
"?" [CR]
"000_%1" [CR]
"ON" --------- Selected Freeze
%1
"OFF" -------- Canceled Freeze
"?" [CR]
"000_%1" [CR]
"ON" ----------- Presentation timer is active
%1 "STOP" ------- Presentation timer is pause
"OFF" --------- Presentation timer is inactive
"?" [CR]
"000_%1" [CR]
"********"
Show 32bits hexadecimal numeral in 8 figures
%1
:
"FFFFFFFF" = All are normal
"?" [CR]
Page 45 of 46