Cf_Bltinsp Command; Setting Series Command; Cf_Bback Command; Cf_Disp Command - Canon LV-7565 Specification

Expand Serial Command Specification

8.9.3. CF_BLTINSP Command

Command "CF_BLTINSP_%1" [CR]
"ON" ------- Select Built-in Speaker
%1
"OFF" ------ Cancel Built-in Speaker
Set / Cancel Built-in Speaker. (Only valid when it is in the usual Power On
Details
state)
Acceptable
Response
Unacceptable

8.10. Setting Series Command

8.10.1. CF_BBACK Command

Command "CF_BBACK_%1" [CR]
"ON" ------- Select Blue Bacck
%1
"OFF" ------ Cancel Blue Back
Set / Cancel Blue Back. (Only valid when it is in the usual Power On state)
Details The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
Acceptable
Response
Unacceptable

8.10.2. CF_DISP Command

Command "CF_DISP_%1" [CR]
"ON" ------- Select Display
%1
"OFF" ------ Cancel Display
Set / Cancel Display. (Only valid when it is in the usual Power On state)
Details The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
Acceptable
Response
Unacceptable

8.10.3. CF_LOGO Command

Command "CF_LOGO_%1" [CR]
"ON" ------- Select Logo
%1
"OFF" ------ Cancel Logo
Set / Cancel Logo. (Only valid when it is in the usual Power On state)
Details The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
valid.
"000" [CR]
"Error Code" [CR]
valid.
"000" [CR]
"Error Code" [CR]
valid.
"000" [CR]
"Error Code" [CR]
Page 28 of 46