Download  Print this page

Troubleshooting; Solving Basic Printer Problems; Printer Control Panel Display Is Blank Or Displays Only Diamonds; Solving Printing Problems - Dell 5535 Mono Laser User Manual

Monochrome laser mfp.
Hide thumbs

Advertisement

Table of Contents

Troubleshooting

Solving basic printer problems

If there are basic printer problems, or the printer is unresponsive, make sure:
The power cord is plugged into the printer and a properly grounded electrical outlet.
The electrical outlet is not turned off by any switch or breaker.
The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
Other electronic equipment plugged into the outlet is working.
The printer is turned on. Check the printer power switch.
The printer cable is securely attached to the printer and the host computer, print server, option, or other network
device.
All options are properly installed.
The printer driver settings are correct.
Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the
printer back on. This often fixes the problem.
Printer control panel display is blank or displays only
diamonds
The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer on.
If Ready does not appear, then turn the printer off and contact Customer Support.

Solving printing problems

Multiple-language PDFs do not print

The documents contain unavailable fonts.
1
Open the document you want to print in Adobe Acrobat.
2
Click the printer icon.
The Print dialog appears.
3
Select Print as image.
4
Click OK.

Error message about reading USB drive appears

Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices,
contact the place where you purchased your printer.
Troubleshooting
257

Advertisement

Table of Contents

   Also See for Dell 5535 Mono Laser

   Related Manuals for Dell 5535 Mono Laser

This manual is also suitable for:

5535

Comments to this Manuals

Symbols: 0
Latest comments: