Print PS Error
PCL Emul menu
<list of available fonts>
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Establishes the font search order
Resident is the factory default setting.
A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
The flash memory option or printer hard disk cannot be Read/Write, Write,
or password protected.
Job Buffer Size must not be set to 100%.
Specifies the set of fonts used by the Font Name menu item
Resident is the factory default setting. It shows the factory default set of
fonts downloaded into printer RAM.
Flash and Disk settings appear only if applicable and show all fonts resident
in that option.
Flash and Disk options must be properly formatted and cannot be
Read/Write, Write, or password protected.
Download appears only if applicable and shows all the fonts downloaded
into printer RAM.
All shows all fonts available to any option.
Identifies a specific font and the option where it is stored
Courier 10 is the factory default setting.
The font source abbreviation is R for Resident, F for Flash, K for Disk, and
D for download.
Specifies the symbol set for each font name
10U PC-8 is the US factory default setting.
12U PC-850 is the international factory default setting.
A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
Understanding printer menus