Installing The Printer On A Wireless Network (Macintosh) - Dell 5535 Mono Laser User Manual

Monochrome laser mfp
Hide thumbs Also See for 5535 Mono Laser:
Table of Contents

Advertisement

7
Connect the cables in the following order:
a
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable
so you can print wirelessly.
b
If your printer has faxing capabilities, then connect the telephone cable.
8
Follow the on-screen instructions to complete the software installation.
9
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step
8 for each computer.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer
1
Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
2
If your printer has faxing capabilities, then connect the telephone cable.
Additional printer setup
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

5535

Table of Contents