Table of Contents
Advertisement
Understanding printer messages
List of status and error messages
Answering
The printer is answering a fax call. Wait for the message to clear.
Busy
Wait for the message to clear.
Call complete
A fax call is completed. Wait for the message to clear.
Change <src> to <x>
<src> is a tray or feeder, and <x> is a paper size or type.
You can change the current paper source for the remainder of the print job. The formatted page will print on the
paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:
Select the paper tray with the correct paper size or type.
•
Touch Use current [src] to ignore the message and print from the tray selected for the print job.
•
Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are
•
specified in the printer control panel Paper menu.
Note: If you touch Continue when there is no paper in the tray, the job is not continued.
Touch Cancel job to cancel the current job.
•
Check tray <x> connection
Try one or more of the following:
Turn the printer off and then back on.
•
If the error occurs a second time:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the tray.
4
Reattach the tray.
5
Connect the power cord to a properly grounded outlet.
6
Restart the printer.
Understanding printer messages
229
Advertisement
Table of Contents
