Table of Contents
Advertisement
Menu item
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Page Protect
On
Off
Description
Sets the amount of time in seconds the printer waits to receive an
end-of-job message before canceling the remainder of the print
job
Notes:
90 seconds is the factory default setting.
•
When the timer expires, any partially printed page still in the
•
printer is printed, and then the printer checks to see if any new
print jobs are waiting.
Print Timeout is available only when using PCL or PPDS
•
emulation. This setting has no effect on PostScript emulation
print jobs.
Sets the amount of time in seconds the printer waits for additional
data before canceling a print job
Notes:
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
•
PostScript emulation. This setting has no effect on PCL or
PPDS emulation print jobs.
Lets the printer automatically continue printing from certain
offline situations when not resolved within the specified time
period
Notes:
Disabled is the factory default setting.
•
5–255 is a range of time in seconds.
•
Specifies whether the printer reprints jammed pages
Notes:
Auto is the factory default setting. The printer reprints
•
jammed pages unless the memory required to hold the pages
is needed for other printer tasks.
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
•
Lets the printer successfully print a page that may not have printed
otherwise
Notes:
Off is the factory default setting. Off prints a partial page when
•
there is not enough memory to print the whole page.
On sets the printer to process the whole page so that the
•
entire page prints.
Understanding printer menus
188
Advertisement
Table of Contents
