Adjustment and Troubleshooting
4. Adjustment and Troubleshooting
4.1 Alignment and Adjustments
This chapter describes the main functions for service, such as the product maintenance method, the test
output related to maintenance and repair, Jam removing method, and so on.
It includes the contents of manual.
4.1.1 Tech mode
4.1.1.1 Entrance method for Tech mode
In order to enter the tech mode, the entering method should be special because this mode is developed for
engineers related, not for end users.
• Usage
1. Check printer is powered on.
2. Wait until the printer becomes a ready mode.
3. Press Menu -> Up -> Left -> Ok -> Right ->Cancel ->Menu -> Tech menu.
4. Follow a usage for a function you would like to use.
* The procedure and content above can be changed according to the situation.
4-1
Service Manual