Replacing The Toner Cartridge - KIP Color 80 Operator's Manual

2. 5

Replacing the Toner Cartridge

The Toner Empty Indicator on the Operation Panel lights red when any of 4 Toner Cartridges is
empty. On the Media & Toner Information Panel, the Toner Level Indicator informs which color of
Toner Cartridge is empty as all of 4 lamps go off when the concerning color of cartridge is empty.
As printing is not available until the cartridge is replaced, replace it as instructed on and after the
next page.
Se lect
Paper Deck
2 3 4
1
Copy Den sity
NOTE
If very dark image is printed consuming great amount of
toner, the Toner Empty indicator may rarely light even
though the Toner Cartridge still has enough toner. If this
cartridge is installed again, the Toner Empty Indicator
will stop lighting and you will be able to continue printing.
Therefore make sure to check if the toner is still
remaining in the cartridge whenever you remove the
cartridge.
Cu t
M F
D1
K
D2
C
D3
M
D4
Y
Toner Empty Indicator
Toner Level Indicator
(Example : Yellow cartridge is empty.)
D10
W ire -C lean
D9
D8
D7
D6
M enu
D5
1
2
3
4
1-30
Enter O n line
Plain Paper
Vellum/Tracing
Film
Gloss
In Use
Roll Level
Plain Paper
Vellum/Tracing
Film
Gloss
In Use
Roll Level
Plain Paper
Vellum/Tracing
Film
Gloss
In Use
Roll Level
Plain Paper
Vellum/Tracing
Film
Gloss
In Use
Roll Level
Toner Level
Toner Level
Toner Level
Toner Level