KIP Color 80 Operator's Manual page 17

Name of part
Fuser Upper Cover
Fuser Cover
Transportation Unit 1
Transportation Unit 2
Transportation Unit 3
Transportation Unit 4
Power Cord
AC Main Switch
Stacker Communication
Port
PC Port
(Service use only)
Interface VIII A
Interface VIII B (for
KCS)
Folder Port
Function
Can access the media mis-fed around the entrance of the Fuser
Unit.
Can access the media mis-fed around the Fuser Unit by opening the
Fuser Cover.
Can access the media mis-fed around the Transportation Unit 1.
Can access the media mis-fed around the Transportation Unit 2.
Can access the media mis-fed around the Transportation Unit 3.
Can access the media mis-fed around the Transportation Unit 4.
To be connected to the wall outlet alone.
NOTE : Specification for the power cord used in North America
Use the following type of power cord (UL-Listed).
(1) Rating 250VAC, 20A
(2) Plug type NEMA6-20
(3) Socket type IEC60320 : C19
(4) Cord SJT 3xAWG12 L <4.5m
(5) UL-Listed
Supplies or shuts off the AC main power.
Connect the signal cable from the Auto Stacker. Connector type is
RJ11 : 5VDC max
(NOTE : Do not connect a telephone line.)
Service personnel only use this port :
USB 2.0 Type B male : 5VDC max
Not Used
MDR Connector 36 pins : 3.3VDC max
Connect the signal cable from the PC unit.
MDR Connector 36 pins : 3.3VDC max
Not Used
1-12