KIP Color 80 Operator's Manual page 32

3. Arrange the edges of multiple media, put them on the Bypass Feeder by landscape position,
and move them forward until contacted to feeding roller.
Feeding roller
NOTE
As curled cut sheet media will cause a mis-feed, straighten the media as far as possible
before printing. And set the media by "curl down" direction as a mis-feed can be avoided.
Setting of media by "curl up" direction tends to result in a mis-feed.
Correct (curl down)
4. Output a copy/print job from the output device.
Incorrect (curl up)
1-27