How to operate the Area Shot function (U.S.A./CANADA only)
How to use the Area Shot function
● Touch
text information for the displayed next
page or previous page.
●
: Displays POI vicinity information
for the next page
: Displays POI vicinity information
for the previous page
● Touch
display.
When an optional GPS unit is connected
When an optional GPS unit is connected, the following operations are available.
● When your vehicle enters the display/map range of the guidance point, a blinking mark will
appear to indicate the position of your vehicle.
● When the vehicle position mark goes outside of the map display area, a map with the
vehicle position mark is no longer displayed. When this happens, switch to the next
guidance point. For details, see "Switching guidance points" on page 144.
To end Area Shot
Press
AREA SHOT
● The Area Shot can be ended by ejecting the "Memory Stick Duo".
148
or
to switch among
OFF
to cancel the POI vicinity
.